Rexmotion Semi Auto Change Spindle AC Servo 6K RPM, Masso 3 Axis Essential.
** Please contact us for a shipping estimate. **
Rexmotion REV 1 Mini Mill 95% Assembled Semi Auto tool change BT30 high torque at lower RPM.
More images to come.
Capable of full auto auto tool change (8 station) with controller upgrade and hardware add on for your future build (DIY).
Demo Condition (12 hours of use): There are some imperfections (broken taps, etc. but the machine is operational.)
Frame, Linear Bearings, Ball screw, Motor, Driver, ATC Spindle, MASSO Controller, Umbrella 8 ATC, and Ball screw cover.
** Some Assembly Required ** This machine is 95% built. All repairs are on site at Rexmotion facility in California. The buyer must be willing to troubleshoot and make all repairs on their own with the assistance of Rexmotion.
** 4-6 weeks lead time **
The billet aluminum parts are designed and machined in Southern California. MADE in the USA!
This item is great for those who want to add on their own particular parts but do not want to make their own cnc mill frame. These parts will allow for you to make your own build with ease and it will look very nice when done compared to other home made design suggestions out there.
The frame is cnc milled from 6061-T6 aluminum.
Parts that come with this sale:
20mm linear rails, cap screws. (installed)
20mm Square bearings with no flange. (installed)
Motor mount frame Designed to fit Nema 34, cap screws. (installed)
16mm Ball screws. 1605 for accuracy compared to 1610. (installed)
Grease plumbing. (installed)
Grease manifold with grease nipples. (installed)
3x Couplers with .500" ID or 14mm to motor shaft. (installed)
Home switches for X, Y, and Z. (installed)
Spindle used as Semi-Auto Tool Changes.
BT30
0-6,000 rpm
220V input single phase 1.8 motor
The motor is 3,000 rpm with a 2:1 pulley ratio. 6,000 rpm at the spindle.
Air requirements of 115 PSI
Includes BT30 Tool Holder ER20.
Will have a button for releasing and pulling in the tool.
3 Axis Controller (Essential)
MASSO G3 Essential (non-touch - you must upgrade to to Advanced, in order to make your DIY auto tool change)
Includes a 19" Monitor
CNC Controller with full hardware and Essential level software
⦁ Standalone, PC-less operation
⦁ 3-axis motion control
⦁ Tools & Workoffsets
⦁ Conversational routines
⦁ Basic start/stop inputs and homing
⦁ Real-time DRO (digital readout) and job status display
⦁ Intuitive touchscreen interface or standard display depending on model
⦁ Easy software updates with no hardware swaps
⦁ Robust reliability with solid-state design
⦁ myWorkshop account for software downloads and update management Extensive documentation
Control Box, Motors, and Drivers
Includes an enclosure for the drivers, power supply, and motor driver. (installed)
12nm closed loop Nema 34 Motors for X, Y, and Z axis. (installed)
Drivers to match the motors. 3M cables. (installed)
X and Y 100 ipm - Direct Coupling to Ball screws
Z 50 ipm- Direct Coupling to Ball screws
Travel:
9" x 7" x 10" With Bearing Covers (X,Y, Z)
Footprint:
41"x36"x45"
Bearing Covers (way Covers):
Sides X: 3D printed ABS
Front Y: Steel on Top, cloth on sides.
Back Y: 3D printed ABS
Front Z: Steel on 3 sides
Bearing
20mm linear rails
16mm Ball screws, Provides 0.00035" resolution.
Warranty:
1 Year warranty.
All repairs are on site at Rexmotion facility in California. The buyer must be willing to troubleshoot and make all repairs on their own with the assistance of Rexmotion.
Support:
USA Based local support, (Southern California)
Shipping Weight:
500 to 1000 LBS - depends on options
Woodend crate
Rough Estimate. $700 West USA, $950 Med USA, $1350 South East , $1550 North East USA.
Please contact us, we can configure this item for you.