DIY & COMPLETE CNC MILLING MACHINE

Rev 2. Config 2

Custom CNC Punch made from our Rev 2 Mini Mill Design.

For reference, Rev 1 with the 6hp ATC ISO30 spindle.
Configuration #1.
Frame Only
Starting at $1,895. Please contact us to purchase.
-
Assembly required.
-
Aluminum Frame
-
Spindle Block Assembly
-
Nema 34 motor mounts
Configuration #2.
Frame, Linear Bearings, Ball screw.
Starting at $2,895. Please contact us to purchase.
-
Assembly required.
-
Aluminum Frame
-
Spindle Block Assembly
-
Nema 34 motor mounts
-
Ball screws for X, Y, and Z.
-
End Block with bearings
-
Linear Rails for X, Y, and Z
Frame:
-
Aluminum 6061-T6 Billet
-
Base: Al plate 10" x 31" x 1.75"
-
X: Billet at 8" x 11" x 2.0"
-
Table: Billet at 8" x 31" x 1.5"
-
Z: Billet at 10" x 32" x 1.5"
-
Z Sides Support 28" x 5 x 1.25"
-
CNC Nema 34 Mount
-
CNC Aluminum 16mm Nut Block
​​
Travel:
-
10" x 10" x 10" (X,Y, Z)
-
10" x 7.5" x 10" With Bearing Covers (X,Y, Z)
​
Footprint:
-
25"x32"x32"
​
Resolution:
-
C7 Ball screw 0.0003" (0.00762mm) 7.62 µm.
​
Spindle Weight Capacity:
-
35 LBS
-
Will accommodate air shocks to counter the weight.
​​
Bearing
-
20mm linear rails
-
16mm Ball screws, Provides 0.00025" resolution.
​​
Motor mount frame
-
Nema 34
​​
Warranty:
-
1 Year warranty. Parts Labor at Rexmotion.
​
Support:
-
USA Based local support, (Irvine California)
​
Shipping Weight:
-
180 LBS
-
Shipps in 3 + Boxes. FED EX Ground
Configuration #2-LATC.
Frame, Linear Bearings, Ball screw.
Starting at $3,445. Please contact us to purchase.
-
Assembly required.
-
Aluminum Frame
-
Spindle Block Assembly
-
Nema 34 motor mounts
-
Ball screws for X, Y, and Z.
-
End Block with bearings
-
Linear Rails for X, Y, and Z
-
Linear ATC - 3 Station
-
Air switches for Umbrella ATC - 8 Station
-
Relay for for Umbrella ATC - 8 Station
Configuration #3.
Frame, Linear Bearings, Ball screw, Motor, and Driver.
Starting at $3,550. Please contact us to purchase.
-
Assembly Required
-
Aluminum Frame
-
Spindle Block Assembly
-
Nema 34 motor mounts
-
Home Switches
-
Ball screws for X, Y, and Z.
-
End Block with bearings
-
Linear Rails for X, Y, and Z
-
Closed loop servo Nema 34 motors
-
Closed loop driver
-
24V power Supply for the Drivers
Configuration #4.
Frame, Linear Bearings, Ball screw, Motor, Driver, and ATC Spindle for Semi Auto Tool Change.
Starting at $5,800. Please contact us to purchase
-
Assembly Required
-
Aluminum Frame
-
Nema 34 motor mounts
-
​Home Switches
-
Ball screws for X, Y, and Z.
-
Linear Rails for X, Y, and Z
-
Closed loop servo Nema 34 motors
-
Closed loop driver
-
24V power Supply for the Drivers
-
24V Relay for ATC
-
ATC Spindle ISO30
-
6HP VFD - Programmed for the Spindle
-
Semi Automatic tool Change configuration.

Configuration #5.
Frame, Linear Bearings, Ball screw, Motor, Driver, ATC Spindle, and MASSO Controller
Starting at $7,500. Please contact us to purchase
-
Assembly Required
-
Aluminum Frame
-
Nema 34 motor mounts
-
​Home Switches
-
Ball screws for X, Y, and Z.
-
Linear Rails for X, Y, and Z
-
Closed loop servo Nema 34 motors
-
Closed loop driver
-
​24V power Supply for the Drivers
-
MASSO touch screen and controller
-
24V Relay for ATC
-
ATC Spindle ISO30
-
6HP VFD - Programmed for the Spindle
-
Semi Automatic tool Change configuration.


Configuration #6.
Frame, Linear Bearings, Ball screw, Motor, Driver, ATC Spindle, MASSO Controller, and Umbrella 8 ATC
Starting at $8,600.
Please contact us to pre-order
-
Assembly Required
-
Aluminum Frame
-
Nema 34 motor mounts
-
​Home Switches
-
Ball screws for X, Y, and Z.
-
Linear Rails for X, Y, and Z
-
Closed loop servo Nema 34 motors
-
Closed loop driver
-
​24V power Supply for the Drivers
-
MASSO touch screen and controller
-
24V Relay for ATC
-
ATC Spindle ISO30
-
6HP VFD - Programmed for the Spindle
-
Automatic tool Change configuration.
-
8 ISO30 tool holders
-
Umbrella Auto Tool Change
Prices are subject to change without notice.
Configuration #7.
Frame, Linear Bearings, Ball screw, Motor, Driver, ATC Spindle, MASSO Controller, Umbrella 8 ATC, and Ball screw cover.
Starting at $9,900. Please contact us to order.
-
Assembly Required
-
Partially Sub-Assembled
-
Aluminum Frame
-
Nema 34 motor mounts
-
​Home Switches
-
Ball screws for X, Y, and Z.
-
Linear Rails for X, Y, and Z
-
Closed loop servo Nema 34 motors
-
Closed loop driver
-
24V power Supply for the Drivers
-
MASSO touch screen and controller
-
24V Relay for ATC
-
ATC Spindle ISO30
-
6HP VFD - Programmed for the Spindle
-
Automatic tool Change configuration.
-
8 ISO30 tool holders
-
Tool Setter
-
Linear Rails and Ball screw covers. 3D printed and Steel construction.
Configuration #8.
Frame, Linear Bearings, Ball screw, Motor, Driver, ATC Spindle, MASSO Controller, Umbrella 8 ATC, and Ball screw cover. Please contact us to order.
-
Fully Assembled
-
Aluminum Frame
-
Nema 34 motor mounts
-
​Home Switches
-
Ball screws for X, Y, and Z.
-
Linear Rails for X, Y, and Z
-
Closed loop servo Nema 34 motors
-
Closed loop driver
-
24V power Supply for the Drivers
-
MASSO touch screen and controller
-
24V Relay for ATC
-
ATC Spindle ISO30
-
6HP VFD - Programmed for the Spindle
-
Automatic tool Change configuration.
-
8 ISO30 tool holders
-
Tool Setter
-
Linear Rails and Ball screw covers. 3D printed and Steel construction.
-
Cutting 6061-T6
-
.250" Diameter 3 Flute End Mill
-
12K-18K RPM
-
Masso Controller
-
ISO 30 Tool Holder
-
6" Vise was used.














